Experience greater benefits by purchasing direct on PlumbersParadise.net
Everpure CES-2900E-120-DP Duplex Parallel Water Softener System
The Pentair Everpure CES-2900E-120-DP is a high-capacity duplex parallel water softening system engineered for commercial and light industrial applications, featuring 2-inch porting, electronic meter-initiated regeneration for efficient salt and water usage, and continuous soft water supply with hardness removal capacity of 120,000 grains per tank at flow rates up to 94 gallons per minute.
Performance & Specifications
| Feature | Specification |
|---|---|
| Model Number | CES-2900E-120-DP |
| Hardness Removal Capacity | 120,000 grains per tank (100,000 grains @ 36 lbs salt) |
| Resin Volume | 4 cubic feet per tank (8 cubic feet total) |
| Flow Rate | 94 GPM continuous @ 15 psi / 121 GPM @ 25 psi |
| Contaminants Filtered | Hardness minerals, calcium, magnesium, scale-forming deposits |
Key Features
- ā Duplex Parallel Configuration: Two-tank system ensures continuous soft water supply during regeneration cycles with no service interruption
- ā NXT2 Programmable Controllers: Advanced electronic meter-initiated regeneration minimizes salt and water usage while maximizing efficiency
- ā Large Capacity Brine Tank: 750-pound salt storage capacity maximizes time between refills, reducing maintenance frequency
- ā Commercial-Grade Construction: Fiberglass-wound polyethylene pressure vessels with NSF-listed liners ensure corrosion-resistant, leak-free operation
- ā High Flow 2-Inch Porting: Accommodates continuous flow rates up to 94 GPM with minimal pressure drop for demanding commercial applications
- ā Hydraulically Balanced Pistons: Time-tested valve design independently pilots service flow and regeneration for reliable, long-term performance
FAQ
Q: What is the difference between the duplex parallel configuration and a single tank softener?
A: The CES-2900E-120-DP duplex parallel system features two mineral tanks that work in alternating cycles. When one tank regenerates, the other continues providing soft water, ensuring uninterrupted service and higher continuous flow rates ideal for 24/7 commercial operations.
Q: How often does the brine tank need to be refilled with salt?
A: Refill frequency depends on water hardness and usage volume. With a 750-pound salt storage capacity and consumption of 36 pounds per regeneration cycle, the system can handle approximately 20 regeneration cycles before requiring refill, typically ranging from several weeks to months in most commercial applications.
Q: What are the electrical and plumbing requirements for installation?
A: The system requires 115 VAC/60 Hz/1 Phase electrical connection, 2-inch MNPT inlet and FNPT outlet connections, operating water pressure between 25-125 psi, water temperature of 40-100Ā°F, and adequate drain line installation with proper air-gap maintained per local plumbing codes.
What's Included
- Two (2) fiberglass-reinforced mineral tanks with control valves
- One (1) large capacity brine tank (750 lbs salt storage)
- Eight (8) bags of resin media (4 bags per tank, 35 lbs per bag)
- Four (4) bags of gravel media (2 bags per tank)
- NXT2 programmable electronic controllers with communication cables
- Distributor assemblies and mounting hardware
- Installation, operation and maintenance guide
Note: Only use this system with water that is known to be safe. If the water quality is uncertain, ensure it is disinfected before or after filtration.