Chronomite CMT Series - 6.0 | Mini Tank Water Heater

CMT-6.0 Small Electric Water Heater
6.0 gallons (22.71 liters)
26 lbs (11.79 kg) empty weight
A dim 15.5" (394 mm)
B dim 2.75" (700 mm)
C dim 15.75" (400 mm)
D dim 4" (102 mm)
E dim 6" (152 mm)
F dim 23" (584 mm)
G dim 18" (457 mm)
H dim 2.5" (64 mm)

Installation:

A licensed plumber is required for installation according to local regulations. Begin by turning off the breaker and disconnecting the electrical supply. Shut off the cold-water inlet and open a nearby faucet to relieve pressure. Mount the tank vertically on a sturdy wall within 2 ft of the fixture to minimize lag. Connect cold-water supply to inlet, hot-water outlet to fixture, and attach the included pressure-temperature (P/T) relief valve and drain. Wire the unit to a dedicated 120 V circuit per the wiring diagram. Restore water and power, then check for leaks and proper warming.

Maintenance:

Annually drain and flush the tank to remove sediment and maintain heating efficiency. Periodically inspect supply lines, fittings, and relief valve for signs of corrosion or leaks. Test the P/T relief valve by lifting its lever to ensure it discharges briefly, then reseals. Replace the anode rod every 2–3 years in hard-water areas to extend tank life.

Submittal

Installation